Accumulation of uranium by filamentous green algae under natural environmental conditions

The capacity of algae to concentrate uranium under natural environmental conditions is measured by a-spectrometry. Spirogyra, a filamentous green fresh-water alga, has concentrated uranium from a surface concrete ponds with elevated uranium levels (140-1140 ppb). The concentration factors (CFs) ranged from 8.9-67 with an average value of 22.Cladophora spp, a filamentous green marine alga has concentrated uranium from the marine water with a concentration factor ranged from 220–280. The average concentration factor was 250. The factors affecting the sorption process are discussed in detail. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mobilization and fractionation of137Cs in calcareous soils

Mobility of¹³⁷Cs was investigated in columns of calcareous loam and clay soils leached under river water, NH₄OAc, KCl, CaCl₂, and EDTA. Fractionation of Cs into ten sequential fractions was accomplished in the leached soils as well as in soil samples received carrier-free¹³⁷Cs and incubated for 60 d. At the end of 90 d of leaching with river water and CaCl₂, the bulk of Cs applied (>97%) was found to remain in the upper 1 cm of soil columns. On the other hand, the reduction in Cs concentration was approximately 30% with NH₄OAc, 18% with KCl, and 10 to 25% with EDTA. The major soil constituents appeared to be responsible for retaining Cs were clay, silt, and Fe oxides. The leaching consistently increased the magnitude of fractions bound to clay minerals and in most cases decreased the fractions of water soluble, exchangeable, carbonate, and organic matter.     

Spontaneous adsorption of ferrocenes on highly ordered pyrolytic graphite edges

The spontaneous adsorption of ferrocene and eight derivatives have been examined electrochemically on highly ordered pyrolytic graphite edges. All compounds give surface coverages of ca. 2×10^?8 mol/cm². Three of the adsorbed compounds give oxidation waves significantly more negative than their solution counterparts, in contrast with the other six derivatives.     

Volumetric determination of Pt(IV) in the presence of Ir,Pd, and Rh with ferrous ammonium sulfate in alkaline mannitol medium

A potentiometric reductimetric method for the determination of platinum (Pt(IV)Pt(II)) with a standard Fe(II) solution in an alkaline medium of mannitol is described. The method, the error of which does not exceed 2%, can be used in the presence of palladium, iridium, and rhodium.     

Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Co-thickness and oxidation states effect on magnetic anisotropy in Co/MgO heterostructure

Interfacial magnetism and magnetic anisotropy constant ($K_i$) in Co/MgO heterostructure have been studied using ab-initio density functional calculations. It is found that interfacial Co spin magnetic moment shows a strong interdependence on Co-O bond lengths and a reasonable spin-polarization of ～80% is established as a function of Co layers. Our results revealed a saturated positive (out-of-plane) $K_i$ of +2.80 mJ/m² at ≥12 Co layers (～1.6 nm Co thickness), which is associated with orbital magnetic moment difference in [100] and [001] direction along with a strong hybridization between $d_{xy}$ and $d_{x^2?y^2}$ orbitals through orbital angular momentum operator $\stackrel{?}{L_z}$. Furthermore, it is shown that the $K_i$ magnitude almost remains constant and weakens in the case of under- and over-oxidations in the interfacial MgO and Co layers, respectively. Interestingly, $K_i$ improved for oxygen migrated interface due to enhanced $d_{xy}$ and $d_{x^2?y^2}$ orbitals coupling. The disordered interfaces stability is checked by analyzing the formation energy. Hence, the present findings disclose that the higher Co thickness in ordered Co/MgO structure supports to out-of-plane [001] (positive) $K_i$, which could be useful for its technological implementation in high-density magnetic data storage devices with high thermal stability.     

Relationship between liquid crystalline phase stability and ingredient composition in liquid crystal oil–water emulsion

In this study, we postulated that the optical retardation magnitude could be used to evaluate the stability of the LC phase through the Mueller matrix polarimeter method in LC emulsion. In addition, we found that the increase of cetearyl alcohol concentration induced the more periodic dense lattice structure in crystalline phase of LC lamellae and the sorbitan olivate was relatively more responsible for higher ordering in LC phase compared to C12–20 alkyl glucoside in terms of molecular parallel packing on the basis of the optical retardation magnitude. Furthermore, it was confirmed that the LC emulsion had higher skin barrier function owing to lower TEWL and higher reflectance than ordinary emulsion on human skin and maintained a uniform phase without phase separation for 8 weeks.     

A study of heat and mass transfer of Non-Newtonian fluid with surface chemical reaction

Considering the significance of non-Newtonian fluid usage in manufacturing such as molten plastics, polymeric materials, pulps, and so on, significant efforts have been made to investigate the phenomenon of non-Newtonian fluids. In this article the influences of heat and mass transfer on non-Newtonian Walter's B fluid flow over uppermost catalytic surface of a paraboloid is encountered. An elasticity of the fluid layer is considered in the freestream together with heat source/sink and has the tendency to cause heat flow in the fluid saturated domain. The flow problem of two-dimensional Walter's B fluid is represented using Law of conservation of mass, momentum, heat, and concentration along with thermal and solutal chemical reactive boundary conditions. The governing equations are non-linear partial differential equation and are non-dimensionalized by employing stream function and similarity transformation. The final dimensionless equations yielded are coupled non-linear ordinary differential equations. Furthermore, shooting technique along with RK-4th order method is used to get the numerical results. Graphs and tables are modeled by using MATLAB software to check the effects of Walter's B parameter, Chemical reaction parameter and Thickness parameter on temperature, velocity, and concentration profiles. Tabular analysis shows the results of some physical parameters like skin friction coefficient, Nusselt number and Sherwood number due to the variation of Walter's B parameter, thickness parameter and chemical reactive parameter.     

Synthesis and inverse virtual screening of new bi-cyclic structures towards cancer-relevant cellular targets

Structural Chemistry - We report here synthetic approaches to access new classes of small molecules based on three heterocyclic scaffolds, i.e. 3,7-dihydropyrimido[4,5-d]pyridazine-4,8-dione,...